5 Minutes Work To Change Your IPhone 6 Plus Broken Display

iphone 6 screen replacement kit

Because the screen of iPhone 6 plus has been enlarged to 5.5 inches, the opportunity of breaking it has also been enlarged. If unfortunately you broke your iPhone 6 plus display screen, official repair will value you as much as a week exclude the time you make the appointment. So if you are skilled sufficient, changing the iPhone 6 plus damaged display yourself is a greater alternative. Here we are going to walk you through a 5 minutes DIY restore information for changing the broken iPhone 6 plus damaged display.

Cracked the iPhone 6 screen? No worry! Simply observe this step by step iPhone 6 display alternative information, it is only a ten mins work!

Please notice: This process was carried out by our experts who have years of experience of take apart phones, and we used the part which have already got those small elements pre-assembled. This post is certainly not a reference for these who are skilled enough to restore their iphone 7 plus screen kit (Https://resunphone.com) 6+, do this at your own risk, etradesupply is not going to be liable for any damage happened through the repair course of.

Tools Wanted:
Pentalobe Screwdriver
PH00 Philip Screwdriver
A Pair of Tweezers
Suction Cup Tool
Case Opening Instrument

Step 1. Shut down your iPhone 6 plus earlier than you do anything. (Make certain you’ve carried out this earlier than the disassembly begins, or you could cause quick circuit of the inner elements of the telephone which can hurt the motherboard)

Step 2. Undo 2 screws on the underside with the help of the Pentalobe Screwdriver. (We advocate you to make use of a magnetic pad for putting these screws in case dropping them)

Step 3. Stick the suction cup on the bottom of the telephone and then pull out the damaged display. (In case your display has already shattered badly, use clear adhesive tape to cowl the surface of the display to keep away from any further damage)

Step 4. Undo 5 screws holding the metal cowl, then take the metal cover out.

Step 5. Disconnect the digitizer flex cable connector, LCD display flex cable connector, front facing camera connector and house button flex cable connector. (If what you get is the iPhone 6 plus digitizer and LCD screen meeting with house button, frame and front dealing with digital camera, then you simply need to put the brand new one on)

Step 6. Undo the three screws holding the home button retaining bracket then decide it up.

Step 7. Pry up the home button flex cable connector then take away the home button.

Step 8. Undo the 3 screws that holding the steel cover on the ear speaker.

Step 9. Take out the retaining bracket, ear speaker and entrance going through camera.

Step 10. Undo the 7 screws that locking the LCD metallic plate.

Step 11. Pry up the LCD again plate connector.

Step 12. Replace your broken display screen with the brand new one.

Note: We strongly advocate you to check the operate of the new iPhone 6 plus digitizer and LCD screen assembly before you install it on. In the event you sadly get the defective half, you could ask your supplier to exchange for a new one.

18.12.2018 14:01:20
Or visit this link or this one